Geek Bar has been in the disposable market for almost a decade now. From a sea of disposables flooding the market, Geek Bars have solidified their place in it.
They are loved for their innovative designs and class-leading flavor production.
However, not everything is perfect and sometimes these devices can run into issues.
One of the most common problems almost all disposable vape users face is auto-firing. In the case of Geek Bars, after you take a hit you will notice that the device continues to fire.
Generally, this can happen due to a stuck fire button or a faulty battery.
One common reason why it happens is when e-liquid leaks into the device's internals. These problems can lead to overheating, unnecessary battery drain, or even create a safety hazard if left unchecked.
This can be annoying and harmful for your Geek Bar so understanding why it happens can help you fix it yourself!
Understanding the Problem
What Happens When a Geek Bar Keeps Firing After a Hit?
When a Geek Bar continues to fire after you’ve taken a puff it is no less than a technical malfunction in the device’s internals.
Disposable vapes nowadays are designed with an auto-firing mechanism that heats the e-liquid only when you take a draw.
The continuous firing usually points to a few possible issues:
- Auto-draw Sensor Malfunction: Most disposables nowadays come with an auto-draw sensor replacing the older button-style ones. The vape is activated when you take a puff. Sometimes this sensor can become faulty with time or even fresh out of the box. As a result, your vape keeps firing which will strain the coil inside, burn the wick, and lead to battery drain.
- Battery or Chipset Failure: Geek Bars are equipped with a small chipset that controls the device’s functions. This includes everything from power controls to the built-in display charging. Damaged chips from drops can cause the device to misfire or continue firing unexpectedly. Also when the chips are exposed to moisture, it can lead to malfunctions.
- Overheating and Leakage: Sometimes, the e-liquid can leak into the internal parts of the device. As it accumulates on important parts the chipset makes it malfunction. If the e-liquid reaches the battery or connection points, it can trigger the auto-firing problem even when you’re not using it
- Accumulated Dirt And Grim: Sometimes vape liquid can accumulate in the airflow controller which can also lead to auto firing.
Main Causes of Geek Bar Firing Issues
Let's try to get a better understanding of the technical aspects of a malfunctioning Geek Bar.
Cause 1: E-liquid Leakage
One of the biggest reasons why Geek Bars malfunction is because of leaking e-liquid. E-liquid can sometimes leak from the cartridge into other parts of the device. When this happens, the liquid may reach components like the auto-draw sensor or the electrical circuits.
If e-liquid seeps into the sensor, it can cause it to malfunction. It sends false signals to the device and causes it to continue firing. This is particularly problematic because the sensor becomes "tricked" into thinking you’re still vaping.
In more advanced cases, leakage can short-circuit internal components from excess overheating leading to device failure. To prevent this, always make sure to keep Geek Bars upright. When storing them flat or upside down the e-juice can leak.
Cause 2: Sensor Malfunction
In Geek Bars these sensors heat the coil when you draw from the mouthpiece. If the sensor is damaged or faulty, it might fail to recognize when the draw completes as a result the coil will keep heating.
One good thing is that the device has a power cut-off feature that automatically cuts the draw at 10 seconds.
Sensor malfunctions can occur due to several reasons. Sometimes, it’s a manufacturing defect; other times, it’s caused by physical damage, such as dropping the vape or exposing it to moisture.
In some cases, the sensor can also become overly sensitive. Environmental factors like air pressure and temperature changes can also accidentally trigger the sensor.
For this, you might have to get a replacement from the manufacturer.
Cause 3: Blocked Airways
Debris and dust can accumulate in the airways of your Geek Bar. This hampers airflow which as a result makes the Geek Bar struggle to detect your inhales correctly.
A blocked airway can cause the sensor to stay activated, as it doesn’t register when the airflow stops. To prevent this regularly clean the device and the airholes.
Blow air through the mouthpiece or use a soft cloth to clean it to remove blockages.
Step-by-Step Solutions For Geek Bar Firing After Hit
If your Geek Bar keeps firing after a hit, there are several practical solutions you can try before considering a replacement. Below are step-by-step instructions on how to troubleshoot and potentially fix the issue.
Step 1: Cleaning the Device
One of the first steps in fixing a Geek Bar that keeps firing is to clean the device thoroughly.
- Start with the mouthpiece: Blow air into the mouthpiece to dislodge any dust or residue that may have accumulated with time. Use a soft cloth or cotton swab to wipe around the edges and remove any visible dirt or particles.
- Check the air intake vents: The air intake vents are another point where grim can accumulate. Blockages here can trigger continuous firing. Use a fine tool, like a toothpick or small brush, to clear these vents carefully.
Step 2: Resetting the Device
Some disposable vapes can be soft reset to restore to normal.
Although Geek Bar does not have a traditional "reset" button, you can try the following steps:
- Power cycle: If your Geek Bar has an on/off switch, turn it off for a few minutes before switching it back on can help reset the sensors and internal components.
- Disconnect and reconnect the battery: Geek Bar devices are typically sealed units. However, you can carefully disassemble the device to disconnect and reconnect the battery to reset the internal circuit. This should only be done if you are confident in handling such devices. Check out the following video for guidance.
Step 3: Safe Disposal
If your Geek Bar continues to fire despite trying to fix it there is nothing more to do but to dispose of it.
It is best to follow local regulations to responsibly dispose of it. Remember disposables are made from plastic so they need to be recycled properly. Otherwise, you will be adding to E-waste that harms the environment!
Preventive Maintenance
You can also take some precautionary measures to prevent your Geek Bar from malfunctioning.
With a few simple maintenance best practices you can ensure these issues are something you do not have to worry about.
Tip 1: Storing Your Geek Bar Correctly
One of the best ways to prevent leakage and ensure the longevity of your Geek Bar is by storing it properly.
- Store it upright: Always store your Geek Bar upright when not in use. Laying it down can cause e-liquid to leak into the airways or other internal components.
- Avoid extreme temperatures: try to store the vape in a cool environment as high heat can cause the e-liquid to become more fluid, increasing the risk of leaks. Cold temperatures can also cause condensation in the device and damage the battery.
Tip 2: Regularly Check for Blockages
Blockages in the airways can trigger problems with airflow detection and lead to auto-firing or inconsistent vapor production. Regular checks and cleaning will help prevent this.
- Clean the mouthpiece and air vents: Use a soft cloth, cotton swab, or toothpick to clean out any dust or debris from the mouthpiece and air vents. This helps maintain the right airflow and prevents the auto-draw sensor from being falsely triggered
- Avoid storing in pockets or bags: Small particles, lint, and dirt from your pockets or bags can easily find their way into the vape’s airways. If you do need to carry your Geek Bar in a pocket or bag, consider using a small protective case to keep it clean.
When to Seek Professional Help?
While many issues with a Geek Bar can be resolved through basic troubleshooting, there are times when professional assistance is necessary.
Persistent Auto-Firing Issues
If your Geek Bar continues to fire after trying all the troubleshooting steps, including cleaning, resetting, and checking for blockages, it’s a sign of a deeper issue, possibly related to the internal wiring or battery.
At this point, further DIY fixes may not resolve the problem. It is best to ask a vape repair technician or contact the manufacturer for advice.
Visible Damage or Leaks
If you notice significant leakage of e-liquid or visible damage to the body of your Geek Bar, the device may no longer function safely.
E-liquid leaking into the battery or electrical components can cause short circuits, overheating, or auto-firing, all of which are potential hazards. In these cases, a replacement is your best bet.
Device Overheating
If your Geek Bar becomes unusually hot, especially while not in use, it’s a major red flag. Overheating can lead to battery failure or even fire hazards. If resetting the device and cleaning it doesn’t help, stop using it immediately.
Battery Problems
Geek Bar devices use rechargeable, built-in batteries. If the battery does not hold a charge, auto-firings, or rapidly drains you need to replace your device. Internal battery issues are difficult to fix on your own.
Do You Think Your Geek Bar Can Be Fixed?
Geek Bars firing after a hit is a common issue that almost all disposables face toward the end of their life. These can be simple e-liquid leakage, sensor malfunctions, or blockages. You can resolve most of these issues yourself by regularly cleaning and staying mindful.
However, if the problem persists replacing the vape is the safest option.
If you’re still experiencing issues with your Geek Bar or want more tips on maintaining your vape devices, explore our other resources. Have you solved your Geek Bar firing problem? Share your experience with our community!
Frequently Asked Questions
Why is my Geek Bar firing by itself?
Your Geek Bar may be firing by itself due to a few potential issues, such as e-liquid leakage, which can interfere with the device’s auto-draw sensor.
When e-liquid seeps into the internal components, it can cause the sensor to misfire.
Other reasons include blocked airways lead to a malfunctioning sensor caused by physical damage or wear and tear over time.
Can I fix my Geek Bar if it keeps firing after a hit?
Start by cleaning the device, especially the mouthpiece and air vents, to remove any debris or e-liquid. If this doesn’t work, you can attempt a soft reset by turning the device off and letting it rest for a few minutes.
How do I reset my Geek Bar disposable vape?
While Geek Bar devices do not have a traditional reset button, you can mimic a reset by turning the device off. Geek Bars have a switch for pulse mode at the bottom which doubles as the airflow controller.
Is it safe to use my Geek Bar if it keeps firing after a hit?
No, it is not safe to continue using your Geek Bar if it keeps firing after a hit. Continuous firing can lead to overheating, which can damage the internal battery and increase the risk of a fire or other hazards.